Saturday, July 6, 2013

Note

The college will function from 10:00AM-04:30PM as usual on Monday

Please inform your friends.

HoD-ECE-SVIT

Saturday, June 29, 2013

College reopens on Monday at 10:00AM

Dear Students,

The college reopens after summer vacation on Monday.
Classwork will begin at 10:00AM.

Best wishes...
HoD-ECE-SVIT

Monday, June 24, 2013

HISTORY OF THE CAR RADIO

Interesting.

***********************************************************

HISTORY OF THE CAR  RADIO
Seems like cars have always had radios, but they didn't. Here's the true story:

One evening, in 1929, two young men named William Lear and Elmer Wavering drove their girlfriends to a lookout point high above the Mississippi River town of Quincy , Illinois ,to watch the sunset.It was a romantic night to be sure, but one of the women observed that it would be even nicer if they could listen to music in the car.

Lear and Wavering liked the idea. Both men had tinkered with radios (Lear had served as a radio operator in the U.S. Navy during (World War I) and it wasn't long before they were taking apart a home radio and trying to get it to work in a car.But it wasn't as easy as it sounds:
automobiles have ignition switches, generators, spark plugs, and other electrical equipment that generate noisy static interference, making it nearly impossible to listen to the radio when the engine was running.One by one, Lear and Wavering identified and eliminated each source of  electrical interference.When they finally got their radio to work, they took it to a radio convention in Chicago .
There they met Paul Galvin, owner of Galvin Manufacturing Corporation.He made a product called a "battery eliminator" a device that allowed  battery-powered radios to run on household AC current.But as more homes were wired for electricitymore radio manufacturers made AC-powered radios.
Galvin needed a new product to manufacture.When he met Lear and Wavering at the radio convention, he found it.
He believed that mass-produced, affordable car radios had the potential to become a huge business.

Lear and Wavering set up shop in Galvin's factory, and when they perfected their first radio, they installed it in his Studebaker.
Then Galvin went to a local banker to apply for a loan. Thinking it might sweeten the deal, he had his men install a radio in the banker's
Packard.Good idea, but it didn't work -- Half an hour after the installation, the banker's Packard caught on fire. (They didn't get the loan.)
Galvin didn't give up.He drove his Studebaker nearly 800 miles to Atlantic City to show off the radio at the 1930 Radio Manufacturers Association convention.

Too broke to afford a booth, he parked the car outside the convention hall and cranked up the radio so that passing conventioneers could hear it.
That idea worked -- He got enough orders to put the radio into production.

WHAT'S IN A NAME
That first production model was called the 5T71.Galvin decided he needed to come up with something a little catchier.
In those days many companies in the phonograph and radio businesses used the suffix "ola" for their names - Radiola, Columbiola, and Victrola were three of the biggest. Galvin decided to do the same thing, and since his radio was intended for use in a motor vehicle, he decided to call it the Motorola.
But even with the name change, the radio still had problems:
When Motorola went on sale in 1930, it cost about $110 uninstalled, at a time when you could buy a brand-new car for $650, and the country was sliding into the Great Depression. (By that measure, a radio for a new car would cost about $3,000 today.)
In 1930 it took two men several days to put in a car radio --
The dashboard had to be taken apart so that the receiver and a single speaker could be installed, and the ceiling had to be cut open to install the antenna.
These early radios ran on their own batteries, not on the car battery, so holes had to be cut into the floorboard to accommodate them.
The installation manual had eight complete diagrams and 28 pages of instructions.

Selling complicated car radios that cost 20 percent of the price of a brand-new car wouldn't have been easy in the best of times, let alone during the Great Depression -- Galvin lost money in 1930 and struggled for a couple of years after that.But things picked up in 1933 when Ford began offering Motorola's pre-installed at the factory.In 1934 they got another boost when Galvin struck a deal with B.F. Goodrich tire company to sell and install them in its chain of tire stores.By then the price of the radio, installation included, had dropped to $55. The Motorola car radio was off and running.
(The name of the company would be officially changed fromGalvinManufacturing to "Motorola" in 1947.)

In the meantime,
Galvin continued to develop new uses for car radios.In 1936, the same year that it introduced push-button tuning, it also introduced the Motorola Police Cruiser, a standard car radio that was factory preset to a single frequency to pick up police broadcasts.In 1940 he developed with
the first handheld two-way radio -- The Handie-Talkie -- for the U. S. Army.

A lot of the communications technologies that we take for granted today were born in Motorola labs in the years that followed World War II.
In 1947 they came out with the first television to sell under $200.In 1956 the company introduced the world's first pager;
in 1969 it supplied the radio and television equipment that was used to televise Neil Armstrong's first steps on the Moon.
In 1973 it invented the world's first handheld cellular phone.Today Motorola is one of the largest cell phone manufacturer in the world --
And it all started with the car radio.

WHATEVER HAPPENED TO
The two men who installed the first radio in Paul Galvin's car, Elmer Wavering and William Lear, ended up taking very different
paths in life.Wavering stayed with Motorola. In the 1950's he helped change the automobile experience again when he developed the first automotive
alternator, replacing inefficient and unreliable generators. The invention lead to such luxuries as power windows, power seats, and,eventually,
air-conditioning.

Lear also continued inventing. He holds more than 150 patents. Remember eight-track tape players? Lear invented that.But what he's really famous for are his contributions to the field of aviation.He invented radio direction finders for planes, aided in the invention of the autopilot,
designed the first fully automatic aircraft landing system,and in 1963 introduced his most famous invention of all, the Lear Jet,
the world's first mass-produced, affordable business jet. (Not bad for a guy who dropped out of school after the eighth grade.)

Sometimes it is fun to find out how some of the many things that we take for granted actually came into being!
and It all started with a woman's suggestion!!!

**************************************************************************

HoD-ECE-SVIT

Tuesday, June 18, 2013

A nice poem with a moral

The Calf-Path
by  Sam Walter Foss  (1858-1911)

One day, through the primeval wood,
A calf walked home, as good calves should;
But made a trail all bent askew,
A crooked trail, as all calves do.

Since then three hundred years have fled,
And, I infer, the calf is dead.
But still he left behind his trail,
And thereby hangs my moral tale.

The trail was taken up next day
By a lone dog that passed that way;
And then a wise bellwether sheep
Pursued the trail o’er vale and steep,

And drew the flock behind him, too,
As good bellwethers always do.
And from that day, o’er hill and glade,
Through those old woods a path was made,

And many men wound in and out,
And dodged and turned and bent about,
And uttered words of righteous wrath
Because ’twas such a crooked path;

But still they followed — do not laugh —
The first migrations of that calf,
And through this winding wood-way stalked
Because he wobbled when he walked.

This forest path became a lane,
That bent, and turned, and turned again.
This crooked lane became a road,
Where many a poor horse with his load

Toiled on beneath the burning sun,
And traveled some three miles in one.
And thus a century and a half
They trod the footsteps of that calf.

The years passed on in swiftness fleet.
The road became a village street,
And this, before men were aware,
A city’s crowded thoroughfare,

And soon the central street was this
Of a renowned metropolis;
And men two centuries and a half
Trod in the footsteps of that calf.

Each day a hundred thousand rout
Followed that zigzag calf about,
And o’er his crooked journey went
The traffic of a continent.

A hundred thousand men were led
By one calf near three centuries dead.
They follow still his crooked way,
And lose one hundred years a day,

For thus such reverence is lent
To well-established precedent.
A moral lesson this might teach
Were I ordained and called to preach;

For men are prone to go it blind
Along the calf-paths of the mind,
And work away from sun to sun
To do what other men have done.

They follow in the beaten track,
And out and in, and forth and back,
And still their devious course pursue,
To keep the path that others do.

They keep the path a sacred groove,
Along which all their lives they move;
But how the wise old wood-gods laugh,
Who saw the first primeval calf!

Ah, many things this tale might teach —
But I am not ordained to preach.


Saturday, June 15, 2013

Another perspective of acquiring project related skills - random thoughts

Dear ALL,

I have been thinking how to make a newbie in to electronics realise the simplicity of doing projects without any basic knowledge of electronics. Here are some of my random thoughts. I my or may not refine them later.

As a newbie, when I enter the portals of a college, the first important influence on me would definitely be the existing customs and idea-flow that exists in the campus. I remember my own college days where the influence of seniors was the greatest when it came to crucial decisions. It takes a while before one realises that there are general truths and specific truths  - meaning those that apply to a group and those that apply to an individual. It is here that the boundaries become blurred. It is here that as a student, I have to weigh a group/senior decision against my own wisdom of decision making.

The crux of the matter will now be whether I will go with the flow or dare to swim against the current. Of course, this decision has two outcomes. If my decision to swim against the current is wrong, I will eventually drown - else, I will set a trend.

Now to the actuals.

I have been told that engineering is acquiring an ability to apply knowledge of maths, science and engineering.

Which means I have to acquire an ability. And what is meant by ability ?

  • the quality of being able to perform; a quality that permits or facilitates achievement or accomplishment
  • possession of the qualities (especially mental qualities) required to do something or get something done

  • ability is connected to performance / doing something or getting something done.


    The ability naturally comes from practise. Let me give an example : Everyday, I am taught in the class on a subject titled "target acquisition and destruction". In this class I am taught what a target is, how many types of targets are there, which are the targets are stationary and which are moving. If moving then what is their nature of movement and so on. Next I am taught what is meant by destroying a target. What are the various objects that can cause destruction, how to select a particular object to match a particular target and so on.  If I merely bank of the theoretical knowledge see what happens. 

    One fine morning, I am suddenly asked to show my ability to apply my knowledge of TAD ! In a short duration, I must be able to recognise a target, select the appropriate object that destroys the target and then initiate the process of projecting the object towards the target such that both meet at a point. Meeting = destruction and no meeting = no destruction.

    Looking at the above scenario, what is the most important objective expected to be achieved ? Is it the student's theoretical knowledge which will help in no way to destroy the target ? or the semi-skilled application of the ability which releases an object towards the target but fails to connect ? If I have been practising using bow and arrow, can I pick an K-47 and hope to hit the target when I do not know how to release the catch of the gun ? or how to bear the recoil ?

    How can a student apply the above principle in real life ?

    What should I DO DAILY to say that I have the ability to apply maths,science and engineering ? 

    What makes me more valuable in the job market ? Talking about TAD or showing the ability to destroy a target ?

    Just asking........

    Now to electronics. What did I learn (theory) till now and what can I do with that  ?

    Can I, using electronic devices and circuits to :  
    1. add two signals  ?
    2. select one among many signals ?
    3. Integrate/Differentiate a signal
    4. Generate a signal which lets me know when a signal goes above or below two threshold values.
    5. take a proven method of doing something and realise it like using Successive Approximation to convert an analog sample to digital
    6. convert parameters from one form to another (temperature to voltage, voltage to pressure, movement to current, current to mechanical motion etc etc).
    7.  apply my intelligence and make them work independent of human intervention in complex environments (as in the case of microcomputers ?)

    I realise from the above list that engineering involves a never-ending cycle of learn-do-evaluate-learn-do-evaluate.

    Unless I keep doing this, will I ever acquire the ability that the industry is looking for ?

    Would I not love to be in a group/team/section/class/department/college where the above cycle is being regularly practiced by all involved ?

    Just asking.......

    HoD-ECE-SVIT



    Project Ideas for Digital Signal Processing

    Dear ALL,

    Digital Signal Processing is applied to signals that have no acceptable quality due to the inherent addition of either noise or some sort of distortion they suffer as they pass through a non-linear system.

    The processing in the Digital Domain cannot be understood properly without having a complete idea about the type  of distortion that has caused the problem.

    So, here is how any DSP solution can be framed :

    1. Must have a complete idea about the nature of the input signal  being processed. Theoretical study is necessary here. Almost all the expertise goes into this area.
    2. Once the nature of the signal is known and the nature of distortion or noise is know, you will then proceed to create a model which is nothing but a system designed to solve the problem.
    3. This is called as the filter design.
    4. You already know in how many different ways a filter can be designed.
    5. In a mini-project, you have to learn how to start with a problem and end with a model.
    6. If you are successful in designing the filter model then last step would be to realise it in C or MATLAB (you should know how to write the code - Practise/learn from examples).
    7. You must then select any one of the DSP chips (we have Texas Instruments) must transfer the code into the chip, apply the problem signal and show at the output that the problem is solved.
    8. To edit, compile, simulate and debug the code you need an integrated development environment which is different for different chips made by different companies.
    9. Code Composer Studio - as the name suggests, helps us in composing the code and it is your studio (place of work) where you develop all your DSP application programs.

    The cycle  of writing the code in CCS , dumping into the chip and testing is the easiest part.

    The most geek/difficult part is to understand the nature of the input signal and imagine a model/ system/filter that will remove the distortion/noise from the input signal and deliver the clean signal at the output.

    Fortunately, in a fixed system and channel everything remains constant like distortion and noise remain same with time.In such cases we can design simple filters.

    What if these characteristics CHANGE with time ? This requires a dynamically changing model.
    That is where ADAPTIVE FILTERS step in.

    Good Wishes...
    HoD-ECE-SVIT

    Friday, June 14, 2013

    Project work updates

    Dear ALL,

    A few more updates based on interaction with some batches till now :

    1. I am requesting every student who met me to write a summary and mail me. This is for two reasons. One, to improve the written communication of each one of you and two to make sure what you have understood is the same as what I wanted you to understand - meaning is -  to avoid any confusion in you about what I said.
    2. Once your mail is ok, I am suggesting Jaideep to post it to your facebook group for every one to read. This way, the team which comes the next day will have new questions or new inputs.
    3. By now, some of you may have understood that I am looking at developing your PROJECT MANAGEMENT SKILLS and am NOT concentrating on the SPECIFIC PROJECT you are doing.

    4. Point 3 has more impact because it will identify and nurture those students who have the potential to become leaders. It is like the Chinese proverb of teaching a hungry man how to fish rather than give him a fish.

    5. I request each one of you to speed up your meeting with me. I am always available. See that the draft of the mini-project is submitted as soon as possible.

    I am taking the help of Jaideep when it comes to posting material in your fb. However, it will be burdening him if I ask him to do everything, so we will have another meeting preferably on Saturday evening or Sunday morning to make your class organisation better focused on projects.

    I will request the representatives to plan this.

    More later...

    H0D-ECE-SVIT

    Thursday, June 13, 2013

    Project Ideas for Embedded System Design

    Dear Students,

    This post is for students who want to do a mini-project in Embedded Systems Domain

    Here are some tips on how to effectively begin and complete your mini-project.

    STEP 1:
    Select a sensor group and an actuator group. Give the title for the mini-project  as 'A comparative study of applications with xxx-sensors using yyyy-microcontroller and zzzz-actuator'. Later of course you can change the title to a more appropriate and specific one.
    STEP 2:
    Identify the companies and sensor/actuator variants and collect all the specifications required to understand and interface the devices to your microcontroller.
    STEP 3:
    Begin designing very simple interfaces using your sensor and actuator to your microcontroller. After a few trials you will begin to understand and get a grip on the functioning of these devices. Until then, work hard and be patient. Then, you will be able to finalise the circuit required to interface the sensor/actuator to the microcontroller.
    STEP 4:
    Begin taking a closer look at the sensor. Understand its behaviour in greater detail and how the physical parameter can be converted to binary data that is readable by the microcontroller. Here, you will have to shift from using an interface that gives only a HIGH or LOW signal to an interface that gives a 4-, 8-, 16- or 32-bit output. Of course you must then know how to use an ADC of the required resolution. Hopefully, another group must be ready with this expertise to help you !
    STEP 5:
    Once you are clear about the smaller details of interfacing, your next task will be to make the microcontroller DO SOMETHING INTELLIGENT (Programming !) to the actuator based on the input data given by the sensor. Here is where your programming skills will help. Also, having the source code for some standard operations will help immensely as C-Progamming is all about reusability of the code ! Do not re-invent the wheel.
    STEP 6:
    You either create a useful application with this OR can go further by taking another sensor of the same group, repeat the above steps and then compare your results. That becomes a comparative study.

    Please note : Such studies involving hardware, software, sensors and actuators will be highly appreciated by academicians as it will help you to project your command and understanding of the work you have done. 

    Hope this is of some help !

    Good Day
    HoD-ECE-SVIT


    Project Ideas in Communication Systems Domain

    Dear Students,

    This post is for students who want to do a mini-project in Communication Systems Domain.

    I will give a few tips on how to take up the mini-project in Communication Systems domain.

    Take a copy of a summary of various branches of Communication Systems taken from a text book 'Principles of Digital Communication - Signal representation, Detection, Estimation and Information Coding' by J. Das, SK Mullick and PK Chatterjee. You can use it as a starting point.

    The mini-project can be decided by choosing one small area in one of the branches. As you already know, any communication system consists of various 'building blocks' that perform  a SPECIFIC function in the chain of communication starting from the message generation to message reception. On its way, the message is converted to electrical energy, conditioned, A/D Converted, encoded, modulated, multiplexed, line coded, amplified, transmitted, received, amplified, line decoded, demodulated, demultiplexed, decoded, D/A Converted and finally delivered to the receiver.

    All the above operations required special purpose building blocks that need to perform their task to perfection. You can select and master one or two such blocks , while the other team take up other parts of the chain.

    STEP 1 :
    Pick up any one area , say the Communication channel. The communication channel can be created in the lab ? The answer is yes. Only, we must know what is the function of the communciation channel. Let us say , it introduces a specific parameter called 'noise'. We can NOW completely focus our energies on channel noise and try to pick up a title for our mini project.

    A mini-project to design a building block for Channel noise using ____________________.

    To generalise the above topic we can say :

    A mini-project to design a building block for _________________ using ____________________.

    STEP 2:
    We must now choose specific topic in the first blank to be filled and the second blank to be filled. Since we selected noise, I will take White Gaussian noise for the first blank and Matlab for the second blank. Then my title becomes : 
    A mini-project to design a White Gaussian Noise Generator using MATLAB. 

    Other titles :
    A mini-project to design a building block for a DPSK encoder using MATLAB.
    A  mini-project to design a building block for a Chirp signal generator using MATLAB.

    STEP 3:
    When you get a title like this from your specialisation area within Digital Communications Domain, you can now FOCUS all your ENERGIES on this single topic. Begin collecting all information - Hardware, Software, published papers if any from the internet and simultaneously learn MATLAB and SIMULINK and learn how to use the Communication Blockset.

    STEP 4:

    The next step is to plan migration from theory to practicals. Here you must discuss with all and see how you can convert this concept into practical circuits using either digital integrated MSI circuits or using custom built ASICs that are available from various manufacturers such as Analog Devices, Texas Instruments, Maxim, Philips, etc.

    Or you can show the implementation as an FPGA realisation !

    Then you can enhance the work title to :
    A mini-project to design a building block for a White Gaussian noise generator using Xilinx FPGA.
    which can be simplified and refined to a more readable title such as
    Adaptive White Gaussian Noise Generation using Spartan XXX.

    Hope this was of some help.
    Please keep designing simple circuits in the lab as they will help you in developing the attitude required for taking up projects on a higher scale.

    ALWAYS REMEMBER : TOGETHER WE CAN DO IT.

    Good Wishes
    HoD-ECE-SVIT

    Monday, June 10, 2013

    Ingenuity a midst constraints

    Dear All,

    The society is always facing some problems, challenges or opportunities.

    This is true even to an individual.

    An Engineer (derived from the word ENGINE) must stand at the forefront of his group/society at the local/global level and play the role which he/she has OPTED to play. For him/her there are NO PROBLEMS ! There are only OPPORTUNITIES and challenges also called CONSTRAINTS !!

    I use the word OPTED because -it means you have entered the waters knowing fully well what your role and responsibilities are.

    Sometimes, when the roles are not respected and allowed to function in the manner defined, confusion sets in.

    Many times, confusion is deliberately created to exploit the gullible.

    It is during these times that one can regain ones focus by going back to the fundamentals.

    Objectives and Principles which you or an engineer is supposed to adhere to help in this situation.

    Always remember this : no matter what you do : think of constraints and learn to use your intelligence and ingenuity to optimise under constraints.

    Because, that is what an engineer is expected to do.

    It is a challenge, a passion and a commitment to your society.

    There are constraints such as time, space, quality, cost etc. Learn to explore and provide solutions  keeping the above in mind.

    Your fundamentals will be right and you will be on the right path.

    You may not achieve the best solution, but you are on the right path to achieve it tomorrow.

    Best
    HoD-ECE-SVIT

    Update

    Dear ALL,

    Yesterday (10th June) I was unwell and hence decided to take rest at home.

    I request you to call me over phone (NO SMS) and confirm my availability in the department before coming.
    Today, I am coming as I feel better with medication.

    Yesterday, I had a long talk with Siddarth-Sai Charan batch and I tried to explain to them what is normally expected from the "department side" from a batch doing a project.

    I also requested them to POST their understanding of the outcome to all of you (Jaideep to coordinate) so that I need not repeat it. This is the purpose of the nominees.

    I want you to establish a nice environment to do projects in the CORRECT WAY - as expected by the Industry.

    So, I will be very relieved if the entire class comes together to evolve a consensus and show determination to establish BEST PRACTISES in out department.

    This will only take you and the department forward.

    I also hope that the advice sent by Prof Rao H. Unnava will be useful to you all.

    Best
    HoD-ECE-SVIT

    Sunday, June 9, 2013

    Today's meeting - reg

    Dear All,

    Today's meeting organised with the student nominees for mini/major projects began at 10AM and ended late around 2PM.

    The following students were present at the meeting :

    Bhargavi, Eswar Chaitanya, Jahnavi, Jaideep, Datta, Krishna Chaitanya, Lalitha Kumari, Abdul Nabi, Raju, Phanikrishna, Sowjanya Malladi, Sowmika Mydam, Siddharth, Vedasri.

    I have given a few inputs to the group.

    In future meetings, I will be playing a participatory role while the group will take key decisions on all issues.

    This is to nurture a culture of healthy discussion before decisions are taken by students.

    I will be speaking with the group or individuals in a suggestive manner so that the student can think from different perspectives before arriving at a final decision.

    The above group is requested to maintain this positive environment during their tenure.

    The students will have plenty of apprehensions and reservations to come forward with an open mind.

    This is where the above group must play the key role of  interfacing for maximum understanding.

    I requested the group leads to prepare the minutes of the meeting and circulate after my verification.

    With this, we will formally begin our project work preparations.

    My special thanks to all of you for putting great efforts in organising a meeting like this.

    A special request to EVERY student is to cooperate with the above group with an open mind and energise your class to set an example for everyone in the department.

    For the next meeting, the group is requested to prepare an agenda in advance and provide time slot for me to give my inputs such that no one has to listen with an empty stomach :)

    Best wishes..
    HoD-ECE-SVIT

    Saturday, June 8, 2013

    Sunday 10 AM Meeting

    Dear Students,

    I am available today in the department from 10AM to initiate the mini/major project works.

    HoD-ECE-SVIT

    Saturday, June 1, 2013

    Mini and Major Projects 2013-2014 for 2010 Batch - reg

    Dear Students

    I have received the following list of students who will be helping me in handling the mini- and major- projects for your class.

    The OBJECTIVES of this team are a follows :

    1. Have a close rapport with HoD and understand the real purpose and intent behind decisions taken.
    2. Constantly communicate with all students of their section to remove all communication gaps that are bound to arise from decisions taken from time to time.
    3. Provide the motivation to both the department (HoD/Faculty) and the class for best performance.
    4. Provide the much needed logistic support from time to time.
    5. Help liaison with experts identified by the department to assist in the projects.
    6. Help in promoting excellence in the department.

    THE STUDENTS IN RED IN THE LIST BELOW MUST SEND AN EMAIL WITH THEIR PHONE NUMBER IMMEDIATELY TO hodece@live.com



    10P71A0416 BHARGAVI KOTTALA
    10P71A0423 ESWAR CHAITANYA ISUKAPALLI
    10P71A0427 JAHNAVI ANDUGULAPATI
    10P71A0428 JAIDEEP REDDY K
    10P71A0434 KOMALI DATTA K
    10P71A0437 KRISHNA CHAITANYA N CH
    10P71A0439 LALITHA KUMARI TANGELLA
    10P71A0442 MD ABDUL NABI
    10P71A0458 RAJESH KUMAR ROKKAM
    10P71A0459 RAJU NUNE
    10P71A0469 SAI PHANIKRISHNA TUMRUKOTA
    10P71A0473 SAIKIRAN ANNEDLA
    10P71A0486 SOWJANYA M
    10P71A0488 SOWMIKA MYDAM
    10P71A0497 SURYA B
    10P71A04A0 THIRMAL REDDY KESANI
    10P71A04A3 VAMSHI KRISHNA K 
    10P71A04A5 VARUN MANIKANTA AKULA
    11P75A0414 SIDDHARTH NAGARIA
    11P75A0416 VEDASRI DAREDDY

    I will set up individual and group meetings with the above students who will in turn connect with the rest of you.

    Best wishes
    HoD-ECE-SVIT

    Saturday, May 25, 2013

    Summary of today's meeting - reg

    Points mentioned by me to your classmates who were present in G6 Block 2 from 11AM to 12:00NOON. A couple of points not mentioned are also added to the list.

    1. It will be nice if 2010 can take the initiative to organise a farewell to 2009 on a mutually convenient date.

    Project work (mini and major)

    1. Nominate 10 students from each section who will act as representatives for their section.
    2. These 10 students will meet HoD as soon as possible and help in beginning and monitoring the project work for their section.
    3. Based on the inconveniences caused to the department and external faculty last year, the following changes are made for this year.
        a. Each team must have 3 students maximum.
        b. The students MUST be from the same section.
        c. Student must come for periodic reviews.
    4. Students should NOT enter in to any agreement with anyone regarding projects (mini or major) without the approval of HoD.

    Best
    HoD-ECE-SVIT

    Friday, May 24, 2013

    Tomorrow's schedule

    Dear Students,

    Please assemble in G6 Block-2 tomorrow at 11 AM instead of 10AM as announced earlier.

    You will be able to go home by 12 noon.

    Best
    HoD-ECE-SVIT

    Wednesday, May 22, 2013

    Mini Projects and Major Projects - reg

    Dear ALL,

    The day after your LAST exam for this semester  which happens to be 25th May, 2013, you are requested to assemble in the college from 10:00AM to 12:00Noon (2 hours).

    We will finalise plans for the mini-projects and major projects , share opinions and then disperse.

    Soon afterwards, I will be collecting the team particulars and beginning monitoring of the progress throughout the summer holidays.

    All this we will share on 25th.

    Please pass this information around and watch this space.

    Good wishes
    HoD-ECE-SVIT

    Monday, April 29, 2013

    Mini Project & Summer Programs- reg

    Dear Students

    A few of you have not given me your emailids and phone numbers. Please do it by sending an email to me as soon as possible.

    Wish you all the best in your exam preparations and exams.

    A.
    We have formulated an evaluation system recently and tried it with the final year students. There was a great deal of encouragement from all the students and they suggested that it should be used very early during the course - meaning you and your juniors.

    I am improving the package experience with more variables and excitement added to it so that it becomes acceptable to a wide range of students.

    We will announce this program to you after you are through with your theory exams.

    B.
    Summer mini project is an important precursor to launching yourself confidently in to a major project. The idea is to gain all that needs to be learnt - the skills and personality traits that are required to do so.

    I request all students  who believe in engineering discipline to lend a helping hand to us in creating a project work  and R&D culture.

    There is so much excitement and fun if only we realise the benefits of  leaving  the safety of the crease and dancing down the pitch to hit the ball for a six !

    I will try my best to talk to you any amount of time and as a student you too must realise that - in the final analysis- in the current scenario, we can do very little unless the student - AS A STAKE HOLDER - realises the gains.

    Simply stated, we need volunteers who can galvanise the department. Those who have a vision and are serious about realising it. Reach out to me, if you can support.

    C.
    Learning resources for students. We have decided to provide , at the beginning of the next semester, learning resources to the students who will benefit  from it.
    This means, we design and publish learning material which can be used in classwork and labwork. Volunteers are needed for this work who will provide the support services to the expert faculty who will be overseeing the work. This interaction will happen through the internet medium and there is lot of flexibility.

    D.
    Upgrading the labs with student initiative.
    Student licenses for software and low cost hardware are provided to promote student learning. to use these effectively, we need STUDENT GROUPS who will adopt one such package, master it and then use their communication skills and marketing skills to promote it across the department. Let us seriously explore this during this summer.

    E.
    Improving the language comprehension skills and learning skills will be another major activity focused on students who are finding it very difficult to cope with the rigours of the present system.

    Finally, if you believe in change, if you believe in self-development, if you believe that tomorrow can be better than today - you can lend your helping hand.

    .......keep thinking.

    Best
    HoD-ECE-SVIT

    Wednesday, April 24, 2013

    MUCH APPRECIATED

    Dear Students,

    You have done yourself proud yesterday by writing the exam.

    We must thank Indra Babu Sir for taking up the responsibility of conducting the exam at short notice.

    The department will announce a few more exams in other important subjects before the main exams.

    Please note : These exams WILL NOT FOLLOW JNTUH pattern, BUT will try to test your overall knowledge in fundamentals. Good grip on fundamentals is the first step to building confidence in yourself.

    These will be organised better, we were surprised with the number and hence the delay in start of the exam (typical exam experience). The mistake in the first question (a) bit must also have been a classic experience to some of you - again typical real exam style :)

    During the last many days, we have been conducting the comprehensive viva (CV 1.0) for the final year students and from this experience, a lot of suggestions have come from your seniors.

    During the coming weeks, we will begin the same exercises on your batch with (CV 2.0). I am sure you will be interested in it and will find it extremely useful during your preparations ahead.

    Meanwhile, please UPDATE your emailids and phone numbers with me by sending a direct mail to hodece@live.com as it will prevent lot of REWORK.

    Feedback and suggestions will be given to you shortly on the DSP performance.

    Best of Luck in your exam preparations ahead...

    HoD-ECE-SVIT

    Tuesday, April 23, 2013

    DSP Exam Details - reg

    Dear Students,

    The exam will start at 10 AM and will end at 1PM.

    There will be 8 questions covering the syllabus and you are advised to answer as many as possible - although choice is given.

    FAQ :

    1. Why exam when we are busy preparing ?
    A.  The department will be able to serve the interests of the students and management MUCH MORE EFFICIENTLY if the faculty is GIVEN A CHANCE to see how the students are performing in a 3 hour exam. This will highlight mistakes being made by students at the conceptual level, execution level and tactical level. Without this, your guess is as good as mine.
    2. What if I miss the exam ?
    A. You may take on another convenient day. Remember, you are providing valuable performance feedback to help us improve our services.

    For further details, please contact Ms Syamala madam after reaching college.

    Date for MPMC exam will be announced today after consulting the faculty.

    HoD-ECE-SVIT

    Monday, April 22, 2013

    DSP Exam -reg

    Dear Students

    As announced earlier in the DSP Labs, there will be a theory exam on DSP fundamentals with some slight changes in the schedule and duration of the exam.

    1. The exam will now be of 2:30 Hrs duration to make it more effective.
    2. The exam date will be 24-04-2013 to enable preparation.
    3. The exam time on 24-04-2013 will be from 10:00AM to 12:30PM.

    Best
    HoD-ECE-SVIT


    Welcome 2010 Batch ECE Students

    Dear ALL,


    Please keep track of this site for my updates which I will be giving regularly as we move in to the final year through a summer vacation which must be made a memorable one..

    Best
    HoD-ECE-SVIT